For leaks in a pipe network very quick action is required to prevent a large volume of valuable drinking water from being lost.
The simple handling and the reliability of SebaKMT technology provide the perfect basis for this.
Zone measurements in a drinking water network make it possible for losses to be quantified. In this process, pressure/flow measurements and level/frequency measurements are used todetermine areas in which leaks have occurred.
The prelocation or circling in on the water leak is done by listening to directly accessible contact points, such as hydrants or valves. Pre-locating leaks works on the principle of “the louder, the closer” and “the quieter, the further away”. After the zone measurements, with pre-location the possible location of the leak is narrowed down.
For concluding leakage pinpointing, SebaKMT offers three quite different technologies (ground microphones, tracer gas detectors and correlators). The aim of all of the SebaKMT solutions in this area is to avoid large excavations and the associated effort and to limit the work exactly to the area where the leak is located.
Continuous zone monitoring and flow measurement with ultrasonics
The new Correlux C-3 is suitable for both immediate measurement (online) as well as night measurement (offline).
In addition to proven technology such as Lift&Shift or patrol, measurement data could be transmitted directly to the control centre.
SebaCloud web software
Using a web browser, you have constant access to exactly all the information and data you need.